Busbars
Welcome to Clarian UK Ltd website.
BUSBARS PIN VERSION
- 1-POLE
- 2-POLE
- 3-POLE
- 4-POLE
PACKAGE BUSBAR FOR FREE PHASE SELECTION/0.5 MW
- Pit rail for wiring of devices with
- Box or series terminal, clamp-type terminal
ACCESSORIES FOR BUSBAR
- Inuslation profile for 3-pole SS, 16 mm
CONNECTION TERMINALS
- Fork, straight, 6-25 mm, short
- Fork, cross-wise 6-25 mm, short
- Pin, straight, 6-25 mm, short
- Pin, cross-wise, 6-25 mm, short
- Fork, straight, 50 mm, short
- Fork, cross-wise, 50 mm, short
- Pin, straight, 50 mm, short
- Pin, cross-wise, 50 mm, short
- Pin, cross-wise, long, 6-25 mm
- Pin, cross-wise, 50 mm
- Pin, straight, 50 mm Tytan feed terminal
- Pin, straight 25 mm/2 screws without insulation
MODUL – CONNECT, THE UNIVERSAL BUSBAR
- Universal busbar
- Push-on in the 9 mm module step
- Any required configuration of the connection flags without breaking off
- Halogenfree
SMALL CONNECT RAIL SET FOR MINIATURE CIRCUIT BREAKERS 1+N, 1SU, 10 mm
- Set contains 1 pcs. 1-meter rail 10mm2 grey, 1 pcs. 1 meter rail 10 mm2 blue, 3 (version 1-pole+N) or 9 (3-pole+N version) flexible 10mm2 wires black ultrasonically-consolidated ends and 3 in bue. The ultra-sonically-consolidated ends of the wires have exactly the same fit which allows them to fit in the terminal of SCHRACK MCBs BM0 1+N with 1 space unit. Compared to a fixed adapter, they offer the advantage that they can be flexible from the side and from the supply device. Set packed in a polybag.
- EXTREMELY COMPATIBLE RAIL FOR MINIATURE CIRCUIT BREAKERS TYPE SI-E 1+N WITH 1 SU
- By using 1+N miniature circuit breakers in a pure single-module configuration helps you make the most of limited space with the same levels of safety. For example, when retrofitting during renovation. Small Connect rails are especially useful for these kinds of applications thanks to its especially compact design.
- FLEXIBLE CONNNECTION WIRES WITH ULTRASONICALLY-CONSOLIDATED ENDS
- These offer the great advantage that they can fit in all terminals irrespective of whether the rail is attached above or below the minature circuit breaker. Also independent of the switch producing the supply current.
- COMPLETE SETS OFFER EASE OF USE
- These Small Connect rail sets for 1-pole + Neutral and 3-pole + Neutral conductor applications have the advantage that always receiving the right connection cable for the rail.
CONNECTION TERMINAL 25 mm2 FOR THE SMALL CONNECT RAIL SYSTEM
- Side connection model saves vertical space and is thus especially suitable for 1-pole Small Connect rails. Straight connection model saves horizontal space and is thus especially suitable for 3-pole Small Connect rails.
CONNECTING WIRE 1POLE, LENGTH 100 mm or 325 mm FOR THE SMALL CONNECT RAIL SYSTEM
- Flexible connnection wires with ultrasonically-consolidated ends, highly compatible with all lift terminals. The 325 mm long connecting wires are used for the connection from raw to raw in the distribution panel.
ACCESSORIES FOR THE SMALL CONNECT RAIL SYSTEM
- Single rail 1-pole, grey, length 1000 mm
- Single rail 1-pole, blue, length 1000 mm
- End cap for 3-pole rail
